FZ1-KP2 Fiber Amplifier
| Light Emitter | Red LED 623 nm |
|---|---|
| Operating voltage | DC12 ~ 24V |
| Current consumption | 40mA Max. |
| Load current | 100mA Max. at DC24V |
| Protection circuit | Reversed polarity protection , over – current protection. |
| Reaction time | on 1 ms, off 1ms |
| Indictors | Output indicator : Red LED , Power indicator : Green LED |
| Sensitivity adjustment | 20 turns trimmer |
| Insulation resistance | 20MΩ min. (DC500V) |
| Voltage withstandability | AC500V 60Hz for 60 Sec. |
| Opera tetemperature | – 10 ℃ ~ + 60 ℃ |
| Operating temperature | 35% ~ 85% RH |
| Protection degree | IP50 |
| Casing material | ABS |
| Wiring method | Pre-wired Ø4.2 x 2 M / 4-wires |
| Option | FZ1 Bracket |
| Weight | Approx. 65g |
FZ1-KP2B Fiber Amplifier
| Light Emitter | Red LED 623 nm |
|---|---|
| Operating voltage | DC12 ~ 24V |
| Current consumption | 40mA Max. |
| Load current | 100mA Max. at DC24V |
| Protection circuit | Reversed polarity protection , over – current protection. |
| Reaction time | on 1 ms, off 1ms |
| Indictors | Output indicator : Red LED , Power indicator : Green LED |
| Sensitivity adjustment | 20 turns trimmer |
| Insulation resistance | 20MΩ min. (DC500V) |
| Voltage withstandability | AC500V 60Hz for 60 Sec. |
| Opera tetemperature | – 10 ℃ ~ + 60 ℃ |
| Operating temperature | 35% ~ 85% RH |
| Protection degree | IP50 |
| Casing material | ABS |
| Wiring method | Pre-wired Ø4.2 x 2 M / 4-wires |
| Option | FZ1 Bracket |
| Weight | Approx. 35g |
Đánh giá
Chưa có đánh giá nào.